Products
Safe-Sleeve MSHA
Easy-to-install, textile MSHA-approved SAFE-SLEEVE is produced from polyester which is recyclable material.
In addition to hoses, SAFE-SLEEVE MSHA protects people near-by a breaking hose and meets the requirements of standards EN 12999 and EN ISO 3457.
Watch these videos where the hose is damaged and the fluid bursts out (Pin Hole):
Video 1: hose without any protective sleeve
Video 2: hose protected with Safe-Sleeve
The recommended temperature range is from -40°C to +120°C. SAFE-SLEEVE MSHA is UV-protected and has a very low conductivity of electricity. Abrasion resistance of SAFE-SLEEVE MSHA is also good.
Test reports are available on request.
As a guideline we suggest that the Safe-Sleeve is a few millimetres larger than the hose. Please see our recommendations.
Colour
Colour black with white printing.
Own printing possible - ask for details.
Length
50m / roll.
Aluminium rings for attaching the Safe-Sleeve on the hose also available.
| SAFE-SLEEVE MSHA Product code |
Inner diameter (mm) (tolerance +/- 0.5mm) | Flat (mm) |
|---|---|---|
| MSHA-RD17M | 17 | 30 |
| MSHA-RD23M | 23 | 40 |
| MSHA-RD27M | 27 | 45 |
| MSHA-RD30M | 30 | 50 |
| MSHA-RD36M | 36 | 60 |
| MSHA-RD39M | 39 | 65 |
| MSHA-RD46M | 46 | 75 |
| MSHA-RD55M | 55 | 90 |
| MSHA-RD62M | 62 | 100 |
| MSHA-RD78M | 78 | 125 |
| MSHA-RD109M | 109 | 175 |
| MSHA-RD125M | 125 | 200 |